Dual Coil Single Width Humbuckers
The first and original truly Extended Response humbucker with a compact sidewinder design. Low noise, with massive 20Hz-20kHz+ frequency response and the tight, focused pickup pattern that was once reserved for single coils. Available for 6, 7 and 8 strings. | |||
![]() |
|||
XR Dual Flex 6 | $79.99 | ||
XR Dual Flex 7 | $84.99 | ||
XR Dual Flex 8 | $89.99 | ||
![]() |
|||
XR Dual Active 6 | $89.99 | ||
XR Dual Active 7 | $94.99 | ||
XR Dual Active 8 | $99.99 | ||
Quad Coil Full Sized Humbuckers
The ultimate low-noise humbucker. Cycfi XR Quad series pickups produce our unmatched tone in a wide field pickup pattern. With 4 side-wound coils, they’re humbucking even in split-mode. Now myriad noiseless switching combinations are possible. | |||
![]() |
|||
XR Quad Flex 6 | $119.99 | ||
XR Quad Flex 7 | $124.99 | ||
XR Quad Flex 8 | $129.99 | ||
![]() |
|||
XR Quad Active 6 | $129.99 | ||
XR Quad Active 7 | $134.99 | ||
XR Quad Active 8 | $139.99 | ||
Support Electronics
The Cycfi XR solderless system includes everything you will need to get an Extended Response pickup system up and running as quickly as possible. Various customizations are possible to suit your exact need. All support electronics use 3M gold-plated pin connectors. Cables included.
Resonant Filter![]() |
$39.99 |
The game changer for expanding your tonal palette. The resonant filter allows you to dial in the characteristics of virtually any pickup, all with the twist of (2) high quality Bourns potentiometers. One for controlling the filter frequency and the other the Q of the filter. Learn more → |
![]() |
![]() |
$19.99 |
Cycfi’s ball-bearing equipped 5-way Flex switch offers expanded switching options beyond those typically found in active systems, including noiseless coil tap settings and more. Solid, positive feel over the course of thousands of throws sets this switch apart from the rest. It is the main hub in your guitar through which all signals pass. | ![]() |
![]() |
$9.99 |
Connect your classic LP style 3-way toggle switch to our configurable breakout board. This serves as the central connection hub for your XR system offering many custom switching schemes all on a solderless board. (Also compatible with T-Style 3-way switches.) |
![]() |
![]() |
$12.99 |
High quality Bourns® volume control potentiometer, smooth action and taper for use with our Cycfi XR Extended Response pickups. | ![]() |
![]() |
$19.99 |
High quality Bourns® volume control potentiometer with integrated ultra-low noise preamp. Features an onboard gain-trimmer for system optimization. | ![]() |
Tone Control![]() |
$12.99 |
High quality Bourns® tone control potentiometer, with smooth action and taper for use with our Cycfi XR Extended Response pickups. | ![]() |
![]() |
$12.99 |
Add new pickup combinations to your arsenal with our blend control. Roll up the Bourns® potentiometer to blend the bridge pickup in with any switch setting. This allows for neck/bridge and neck/middle/bridge sounds not possible with a standard 5 way wiring scheme. | ![]() |
![]() |
$6.99 |
Ensure the power needed to run your ultra low-noise active pickups is always there when you need it with our 9 volt battery clip. | ![]() |
![]() |
$5.99 |
The last step in the chain before your signal is off to the amp. Do it right and make a solid connection every time with this rugged Neutrik® 1/4” output jack. | ![]() |
Pricing and specifications subject to change. Cycfi Research is not responsible for any typographical errors. All trademarks and registered trademarks are the property of their respective holders. The use of these trademarks does not imply any affiliation or endorsement by the trademark holders.