The OnePSG pedal steel guitar

OnePSG: A Pedal Steel Without the Pull Rods

Last time, I promised to share another pedal steel project: the OnePSG, from my friend Alan Pagliere, now in Beta. 

Here’s Alan’s quick look at the OnePSG Beta prototype:

The OnePSG pedal steel guitar
Here it is, in Alan’s own words:

The essence of the pedal steel guitar (PSG) is pitch shifting. A regular PSG uses crossrods (actuated by foot pedals and knee levers), springs, bell cranks, pull rods, and changers to stretch and loosen strings, individually and in combinations, to change their pitches.

About a dozen years ago, the idea came to use real time audio DSP for pitch shifting, since both that technolgoy and microcontrollers (MCUs) had become powerful enough to give it try.

The very first hurdle in this quest that absolutely needed to be overcome was finding single string pickups, since each string needed to be pitch-shifted independently.

The pickups should be magnetic because the sound needed to be like that of a traditional PSG, and with zero crosstalk. Nu pickups from cycfi.com to the rescue!

(Speaking of cycfi.com, many thanks to Joel for being such a great help and supporter of my project since the beginning.)

The rest would just be getting the right technologies to work together. After much learning through experimentation and prototyping, the following design was arrived at:

  1. Analog audio signals from cycfi.com’s Nu pickups are sent in 5 (for 10 strings) or 6 (for 12 strings) groups of two to stereo codecs for digitization.
  2. The digitized signals are taken in by 5 or 6 STM32H7 MCUs.
  3. Each MCU runs DSP to pitch shift in real time two channels.
  4. The shifted audio signals are sent back to the codecs to be converted back to analog.
  5. The 10 or 12 analog signals are summed and sent out to a regular 1/4″ guitar jack.

How is the amount of pitch shifting for each string determined?

In a traditional PSG, pedals and knee levers are mechanically adjusted to change the tension of particular strings to achieve set intervals.

In the OnePSG, the strings and intervals are assigned (via a touchscreen).

Editing a copedent on the OnePSG touchscreen

There is one larger “Control” STM32H7 MCU which has five main functions:

  • interact with the user through the touchscreen
  • maintain non-volatile data
  • take input from Hall Effect sensors which measure the travel of pedals and knee levers
  • based on a chosen “copedent” (tuning), which comprises both open string pitches and assigned pedal/lever intervals, calculate the amount of digital pitch-shifting to apply to each string
  • communicate that information via SPI to the DSP MCUs

To accomplish all this, three kinds of custom PCBs were designed and built:

  • PCB to hold the Nu pickups
  • small PCB to hold a pedal or lever’s Hall Effect sensor (10 used per instrument)
  • one large PCB for the Control MCU, DSP MCUs, codecs, power distribution, cable connections for power, switch, touchscreen, 1/4″ audio out, and USB, and FRAM for non-volatile memory.

Custom software was written for all functions, e.g., UI, sensor reading, copedent editing and saving, real time calculations, SPI messaging.

For pitch shifting, the software is licensed from Shift Audio (https://shift.audio/).
Other DSP processing uses the LEAF open source DSP library (https://github.com/spiricom/LEAF).

Alan Pagliere, Pagliere Steel Guitars

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

1 Comment
Oldest
Newest Most Voted
Lee Young
Lee Young
22 days ago

So impressive!! Great work.

1
0
Would love your thoughts, please comment.x
()
x